Vises 33C 5" Combination Pipe and Bench Vise with 360-Degree Swivel Ba

Description

Yost Vises 33C 5" Combination Pipe and Bench Vise with 360-Degree Swivel Base
Bench-mount vise with swivel base, 5" nominal top jaw width, and 0.125"- to 4.5"-diameter pipe capacity provides clamping action for heavy-duty applications
Ductile iron body has a locking 360-degree swivel base that adjusts the direction of the jaws for proper placement
Top jaws are grooved for enhanced grip and can be replaced when worn
Pipe jaws adjust horizontally and vertically, are set back to prevent interference with top jaw use, and can be replaced when worn
Meets Fed. Spec. GGG-V-410B IV specifications, and is made in USA
The Yost Vises 33C 5" combination pipe and bench vise with 360-degree swivel base mounts to a workbench to provide heavy-duty clamping action, meets Federal Specification GGG-V-410B IV, and is made in USA. The ductile iron body has a 360-degree swivel base that adjusts the direction of the jaws for proper placement. Hand-tightening the two lock knobs on the base secures its position. The top jaws and pipe jaws are made of hardened steel, are grooved for enhanced grip, and can be replaced when worn. The pipe jaws are set back to prevent interference with the use of the top jaws and can be adjusted both horizontally and vertically, customizing the grip for each pipe to prevent marring, crushing, and bending. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. The main screw that controls the jaws has been continuous rolled for high strength and is covered by a bar to protect it from damage. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable of the handle if worn. The base has four 0.73"-diameter holes for mounting hardware (included). Specifications Jaw width (nominal) 5" Jaw opening (nominal) 7.5" Throat depth (nominal) 6" Pipe capacity 0.125" to 4.5" Overall dimensions* 12 x 9 x 20 inches (H x W x D) Weight 96 lb. *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Vises use the clamping action of jaws to hold a workpiece in place for applications such as drilling and sawing. Vise styles are categorized by how the device is mounted. For example, bench vises mount to a benchtop; drill press vises bolt to a drill press; and woodworking vises fit underneath, on top, or to the side of a workbench. A vise's jaw opening and throat depth should be large enough for the workpiece. Yost Vises manufactures a wide range of vises, including bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
Shipping
We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
International buyers
- please note: Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.